Results 1 to 3 of 3

Thread: Avoid being ripped off

  1. #1
    Vulture of The Western World Eric's Avatar
    Join Date
    Jul 2006
    Location
    The Land of The Edentulites
    Posts
    22,763

    Avoid being ripped off

    This is an unpleasant subject - but reality often is.

    As the economy worsens, crime goes up - and that means your tools, classic vehicles and everything else is at greater risk of being ripped off.

    What can you do?

    First and probably most important, be sure you are fully insured. Find out whether your homeowner's policy covers such things as your tools and equipment. And be really sure about it - meaning, are you sure you're insured for the full value of everything you have? As car/bike enthusiasts, many of us have considerably more than a $75 ratchet set, some screwdrivers and a couple of jackstands. A standard homeowner's policy on, say, a $250,000 home may not cover your $20,000' worth of professional tools. So, read your policy - and confirm the details with your agent. It's also a very smart idea to do a full inventory of everything you have - with pictures or video for back-up in the event you get robbed and need to verify the extent of your loss.

    Similarly, be absolutely sure your vehicles - especially antique/collectible vehicles - are fully insured for their specific value (what's known in the business as an "agreed value" policy). That means, simply, if your vehicle is stolen and not recovered, you will receive the previously agreed-upon value listed in your coverage. No haggling after the fact over what it was worth.

    Related point: Many of us neglect to update our policies as we update our cars - or as the retail market value of the car changes. If you recently had your car professionally restored, for instance, you should make sure your policy/coverage reflects that. And also that the "agreed value" is up to date - and not based on what the car was worth five years ago, when you first took out the policy.

    These precautions will minimize your losses if you do get robbed - but what about avoiding a robbery in the first place? Here's a hard lesson, but one that actually has an upside to it: If a pro wants your stuff, he is going to get your stuff. There is virtually nothing you can do to prevent a professional thief from doing his thing. So, what's the upside? The odds of being targeted by a pro are really, really low. Most of the thefts that occur are perpetrated by opportunistic amateurs - and these guys can be thwarted, or just avoided, if you take a few common sense precautions.

    Ok, such as?

    First, don't flash what you have - by doing things like leaving your garage door open so that everyone that drives or walks by has a full view of your treasures. Ditto parking your high-dollar antique vehicle outside, where anyone can see it. Try to keep what you have under wraps - and keep a low profile.

    Second, lock the doors. This is so obvious, so elementary - yet it's a fact that many thieves never have to break into anything. They just walk right on in - and walk away (or drive away) with your stuff.

    Third, if your garage has doors with windows, consider replacing them with solid doors. As nice as it is to have the sun shine in, glass allows a dirtbag to see inside your place - and getting in is as simple as kicking out the window.

    Fourth, keep a bright light on near your garage, ideally one with a motion sensor. The light should be of the floodlight type - and either far enough up or otherwise out of reach that it would take at least a little bit of effort to defeat it by smashing the bulb or some such.

    Fifth, consider an alarm system. You might even get a rate reduction on your homeowner's (as well as your classic car) insurance. Or get a fake alarm - dummy closed-circuit cameras or blinking red LED lights near doors and windows can accomplish the same thing (but forget about the insurance discount).

    Sixth, make your stuff harder to steal. Tools should be secured in heavy, hard to remove/move (and locked) pro tool cases, ideally, cases permanently fixed to hard points such as the floor or workbenches. Garage doors should have heavy metal lock bars and other such devices to make them extremely difficult to open for an unauthorized user.

    Also: There are many ways to discreetly rig a classic car or motorcycle so that it won't start or is difficult (if not impossible) to move. And you should always mark your vehicles (as well as expensive tools) with a Dremel tool or some such in a not-visible/hard to access place with some identifying marks - so that if the vehicle is found, you can prove it is yours.

    These are the "majors" - you can probably think of several others, too. The point though, is to be thinking about protecting what's yours. We live in ugly times - and it's best to be thinking a step ahead of those who might try to take advantage of you.

    END

  2. #2
    Senior Member
    Join Date
    Jul 2006
    Location
    Raleigh NC, USA
    Posts
    3,628

    Re: Avoid being ripped off

    Good point about securing tools. They are easily fenced, as few people go to the trouble to engrave an identifying mark on each and every socket or wrench.

    Chip H.

    Former owner: 2012 Honda Civic LX, 2006 Honda Ridgeline RTL, 2000 Honda CR-V EX, 2003 MINI Cooper S, 1992 Honda Accord LX, 1999 Mercedes ML-320, 1995 VW Jetta GLX, 1991 Mercury Capri XR2, 1981 Mercury Zephyr, 1975 Chevrolet Impala

  3. #3
    Senior Member
    Join Date
    Feb 2007
    Posts
    1,783

    Re: Avoid being ripped off

    This article has been posted on the main site with pictures:





    http://www.ericpetersautos.com/home/...1&Itemid=10923

Similar Threads

  1. The Corn Con (and How to Avoid it)
    By Eric in forum Motor Mouth
    Replies: 0
    Last Post: 11-15-2011, 08:54 AM
  2. Buy or avoid
    By pearly8 in forum Car Care & Repair
    Replies: 10
    Last Post: 04-28-2010, 09:32 PM
  3. Avoid Fords, avoid Fords.
    By Ken in forum On Two Wheels
    Replies: 1
    Last Post: 02-06-2008, 07:01 PM
  4. What to look for (and maybe avoid) in your next new car
    By Eric in forum Advice/Questions/Tips
    Replies: 2
    Last Post: 10-18-2007, 08:05 PM
  5. Avoid getting taken for a ride by the dealer
    By Eric in forum Car Care & Repair
    Replies: 6
    Last Post: 08-08-2006, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •